Tiburon Deluxe

Operating Instructions

Tiburon Deluxe

Underwater Camera

Please read this manual thoroughly before operating the
unit, and keep it for future reference.


• Storage and Keeping

1. Do not expose this equipment to excessive heat or cold place.  The storage

temperature of the monitor is +68°F~+140°F (+20°~+60°C), the operating

temperature is +32°F~104°F (0°C~+40°C)

2. Avoid the machine from dropping or impacting.

3. Never extrude or fractioning this machine with sharp objects.

4. Cables are not allowed to touch hot or rotating parts, such as engine,

ventilators, etc.

5. Keep this equipment out of children’s reach.

• Operating Precautions

1. Connect this equipment only to other compatible units.

2. Make sure that all cables are connected properly, Improper connection may

result in system failures or damages to the system.

3. Cables are not to be pinched or stepped on.

4. Remove the cable connections when system is not in use.

5. The camera must not be located directly under the sun or any other bright

light source because this will not only result in a poor image, but also will

eventually damage the electronics of the camera

6. Additional lighting may be required if water quality is poor, or in low light


• Maintenance

1. Remove all cable connections before cleaning the camera.

2. Wipe off the moisture on the lens of camera regularly.

3. Keep the camera clean and dry when it is not in use.

4. Dry all equipment before storage



NavRoute Technologies (“NavRoute”) warrants this product against any defects in materials or workmanship for one year, parts and labor, from the date of purchase, with an original proof of purchase with retailer receipt. If service under this warranty is required, you must return the product to NavRoute for inspection.  You must first obtain a return material authorization (RMA) number from NavRoute Customer Service prior to returning any products. NavRoute Customer Service can be reached at .  If NavRoute determines that the product is defective, NavRoute will exchange or replace defective parts.

This warranty does not cover:

Products purchased at auctions, or auction sites. 

Damages from misuse, abuse, neglect, or accident, natural disasters, or Acts of God. 

Product which has been electronically or mechanically modified in any way or incorporated into other products. NavRoute is not responsible for any shipping, handling, or insurance charges.



This warranty gives you specific legal rights and you may have other rights which vary from state to state.  Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.



Input voltage

12V DC

Image sensor:


Sensor Size:


Pixel Resolution:


Lens Angular field of view: 


Effective focal length:



420 TV lines (H)

Video signal output:

1 V (p-p) composite video signal at 75ohm termination

Led lights:


Power Consumption:

more than 48db

Packaging material:

High Impact ABS Plastic

Operating temperature:

-20ºF   +80ºF

Storage Temperature (ºC): 


Product Features

High waterproof and dust proof structure of underwater camera.

21 White LED lights for dark environments

System Connections



Symptoms below do not necessarily mean failure with the system.  Please check as following before request for repair.


Possible cause

No Picture

•Use of unauthorized power supply

 Battery low or empty

 Check whether the cables is connected

Dark picture

Check whether power cable is properly connected.

Dim Picture

Check whether the camera lens is dirty

No lights

 Check whether the Power cable is connected.


Easy CAP USB2.0 Video Grabber with Audio

Quick Installation Guide

 The Easy CAP series USB 2.0 Video Grabber, they can capture High-quality video and audio file direct by USB 2.0 interface without sound card. However, the installation is very simple and the external power is unnecessary. Solution for laptop, we have enclosed the professional video editing software Ulead Video Studio 10.0 SE DVD then provide best
editing function for you. Video Studio is video-editing software that makes editing your movies as fun as shooting them. The new Video Studio Movie Wizard helps novice users finish stylish movies in only three steps. Share finished projects on DVD, tape, the Web, and mobile devices. High-speed rendering and real-time performance mean less time waiting and more time creating. By the way, you can create many special effect and clip video files ...etc.

Key Features

 Include Professional and easy to learn & used video editor software: Ulead Video Studio 10.0 SE DVD
 Popular USB 2.0 interface and not need other power
 Capture Video & Audio though USB 2.0 interface
 Support Brightness, Contrast, Hue, and Saturation control
 The dimension suitable that is easy to carry
 Could capture audio without the sound card
 High plug & play
 Support For All Formats: record in DVD+/-R/RW, DVD+/-VR, and DVD-Video.
 Applying to internet conference / net meeting Specification
 Complies With Universal Serial Bus Specification Rev. 2.0.
 Supports NTSC, PAL, Video format
 Video input: One RCA composite, One S-Video.
 Audio input : Stereo audio (RCA)mm
 Dimension (L)88mm x (W)28mm x (H)18mm
 USB bus power
 Supports high quality video resolution
NTSC: 720 x 480 @ 30fps
PAL: 720 x 576 @ 25fps
 Supports Windows XP, Vista

System Requirements

 USB: Compliant USB 2.0 free port
 OS: Windows XP, Vista
 CPU: Intel Pentium 4 or higher
 HD: 1 GB of available hard drive space for program installation,4 GB+ hard drive space for video capture and editing
 Memory: 256MB of RAM (512MB or above for editing)
 Display: Windows-compatible display with at least 1024x768
 Sound card: compatible Windows-sound card Package Contents
 EasyCAP003(or EasyCAP006, or DC60+) USB2.0 Video Grabber
 USB Cable
 Quick Installation Guide
 CD-ROM (included driver and the professional video editor software) Hardware Installation

Hardware Installation

Note: If you have any anti virus software enabled, please disable it during the installation of the software.

Before you first connect the Easy CAP series USB 2.0 Video Grabber to your computer, please insert the “Software CD-ROM” into your CD drive. Select the option “Install Driver”.

If prompted select “No, not this time” and select “Next”. Select the option “Install the software automatically” and click “Next”. A windows may appear about the “easy cap video grabber” not passing the windows logo testing, select “Continue Anyway”. When “Completing the Found New Hardware Wizard” window appears click the “Finish” button to complete the driver installation.
Note: If any further components are found please repeat the above process until you receive the message “Found new hardware : Your hardware is installed and configured use”.

You will now need to check that The drivers are installed correctly. Connect the Easy CAP Video Grabber to your computer, Right Click on My Computer and Left Click on properties. Click on Hardware tab and then Device Manager. In the Device Manager click on the “Sound, video and game controllers” correctly you should see the “easy cap video grabber”. If it has a Yellow mark next to it then this means that the driver is not installed correctly. You will need to remove the driver and disconnect the Easy CAP Video Grabber
from the computer and reconnect is to install the driver again.

Software Installation

Please insert the “Software CD-ROM” into your CD drive, Select your language for the installation and click “Install Video Studio”. And click “Next” or/and “Install”.

You need enter user name and serial number (you can find our the serial number on driver CD bag).

Click “finish” to complete setup, restart your computer if needed.
To start the Video Studio 10.0 application, and enjoy your digital life by use our products.

Important Information:

At you first time connect Easy CAP series USB2.0 Video Grabber, and run Ulead software, you may can not see the picture which you are inputting to the device, don’t worry, do following setting, it will work well.

1, On the Capture panel, click “ capture video”, then click “Option” button.

2 Please click “ Video and Audio Capture Property setting”, and you will see one prompted window.

3, At the prompted window, click “Source” panel, choose the video source as “ Video composite” or “S-Video”.
4, At the TV System, choose “Pal” or “NTSC’ which suitable for your camera.
5, Now you will see the picture, click “ Preview audio with USB device” if you want to preview the video with sound.
6, Please view our Web site: to get the more products information.



If you don't found the information you are looking for please contact us to:











Copyright © 2010 Navroute Technologies All Rights Reserved.