Support

Neptune Silver

Operating Instructions

Neptune Silver

Neptune Silver

Underwater Camera System

Please read this manual thoroughly before operating the
unit, and keep it for future reference.

 

DIGITAL DVR

USER MANUAL

 

 

 

Basic Function

Audio: MP3/WMA/AMR/AAC/FLAC/APE

Video: RM, RMVB, AVI, FLV, MP4, ASF, 3GP, WAV

Picture Browsing: JPEG Format. Full Screen Display, Zoom and slide show

E-Book: Support TXT Format

Voice Record: MIC

Camera: Digital Camera, DV Function

AV OUT Function: AV OUT (NTSC/PAL)

VIDEO Input: AVIN (with recording function)

Memory: 2 GB FLASH (built in), Expansion Micro SD card UP to 8GB.

Build in Speaker

System Setup: Language, Time/Date, AV OUT, Memory, Speaker, Brightness, , auto off, system default, Lyric display synchronously.

Games Download

 

 

When TV OUT on, The unit will be black screen when access to video, picture and games playing.

Green light means working, Red Light means charging.

Notice Before Operation

Tips: the possible reason for being unable to switch on is no battery, please play after charging from both charger and PC

How to charge

Charge For 4-5 Hours for fully charge. Unplug the charger until the battery status to be full.

Notice

A. This charger is for this models only. Do not leave it in humid place, unplug the charger and keep it well after charging. Do not repair, break down or remake the charger.

B. For better performance, please charge the brand new MP4/DVR unit for more than 6 but less than 8 hours for the first time. New battery will reach best performance after a few times charge and discharge.

C. for non use in a long time, It's recommended that charge this player every 2-3 months and then keep it after switch off.

 

Basic operations.

On/Off

Press power button for a long time to access to stand by interface. Same to switch off the player.

Reset

For mistaken operation or other reasons lead to power off or abnormal functions, please press RESET to reset.

Memory options

if any TF card inserted, please go to MEMORY, setup SD card as working memory. System defaults FLASH (built in) As working zone.

U Disk

Upon main menu (other than other interface), connect the USB Cable to with PC to access to U Disk.

 

OPERATION DETAILS

Pictures

Upon main menu, press "+" / "-" and select , press , to enter into the list of pictures. Press "MODE" to enter into thumbnail interface, press SKIP back or forward to select the target picture and for full screen display.

Under full screen display, press SKIP back or forward to change the picture and "+" or "-" to zoom in/out, long time press "+","-", SKIP back or forward to move up/down/right/left. also under full screen display, press for auto browsing.

Press "MODE" to enter into setup menu, with SKIP back or forward to select SLIDE SHOW, DELETE and DETAILES, then press to confirm, press ESC for back menu.

Following is the operations details:

Slide show: press to enter, select SLIDE SHOW, TIME SETUP and press to confirm. Press "ESC" to exit.

DETAILS: with name, date, size of file and picture, type of picture, etc.

DELETE: select and will pop-up YES/NO, press SKIP back or forward for options and press to confirm.

E-Book

Upon main menu, press "+" / "-" and select to enter into E-book. press for file list, press SKIP back or forward to select target file and press to confirm.

Upon E-book interface, press SKIP back or forward to turn over pages, press for auto browsing, press "MODE" to pop out menu and press SKIP back or forward to select NEW BOOKMARK, BOOKMARK LIST AND EXIT, press to confirm.

 

AUDIO RECORD

In the operate interface, press "+" / "-" select , enter and confirm.

A. Record/stop record /stop play, press to switch

B. Delete the record, record again, finish the record, press "MODE" button to select "delete record" " new record", press confirm.

C. Play recording, the recorded audio file in the "AUDIO PLAY"

D. Press "ESC" exit and back to main menu.

AUDIO PLAY

Turn on the MP4/DVR player. Press "+" "-" to select press button to conform (as picture display) press "MODE" to renew database.

SELECT SONGS

in the browse interface. press "+" "-" to select "ALL" "SPECIAL" "ARTIST" RECORD FILE". then press SKIP back or forward to select target music in list.

PLAY MUSIC

In the interface of song list, press SKIP back or forward up/down to select. press to confirm and play.

PREVIUS / NEXT Music. FF/FW

While playing, press SKIP back or forward, then long press to FF/FW. Short press to select previous or next music.

RECYCLE MODE / EQ.

While playing, press SKIP back or forward to select "/ "BASS", then press to select different recycle mode and EQ.

Play record file:

In the browse interface, press "+" / "-" select to display according to record file list, select "unknown" then press display all record files.

Delete file: select target file in song list, press "MODE" pop up menu, select "delete file", press enter option menu and confirm. press "ESC" back to last menu.

NOTE: can not delete the playing song.

Alarm tone: select the favorite song in song list. press "MODE" pop up menu, select alarm tone, press to confirm.

Special Picture: according to the special name, edit the jpg picture with same name as "special name", save it in MUSIC/ALBUM, while playing, can see the special picture, the best size of picture is 140*140

NOTE:

1. Set screen protection in AUTO SCREEN OFF of Setting while listening.

2. Lyric display synchronously when play music:

download LRC format lyric file, put them and songs in the same files. the name of lyric and song must be same, the lyric can be displayed. (Such as ABC. MP3 and ABC.LRC)

CAMERA OPERATION

Power on MP4 player, press "+" / "-" to select , press to enter camera interface.

After enter camera interface press SKIP back or forward to adjust the focus, press "MODE" to take photo and press "ESC" back.

Press "MODE" to enter set menu while capturing, press "+" / "-" to select capture mode, type, resolution,night mode, white balance, capture quality, move SKIP back or forward to select option, press "ESC" to save and exit. (as below picture).

 

Photo browse

Photo file are are saved in PICTURE/DCIM directory, enter "PICTURE" function menu, select "DCIM" to browse the photos.

VIDEO PLAY

the video file is the VIDEO/RECORD, enter into "VIDEO" interface to play..

NOTICE: When the battery is low, please charge the PMP as soon as possible, or stop shooting, so as to avoid missing problem.

VIDEO

Enter in browser mode

In the operating system interface, press "+" / "-" to select press to enter play list press "+" "-" to turn page, press SKIP back or forward to select video file, press to play.

While playing, press "+" / "-" to adjust the volume. press "MODE" to display set bar on the screen, press SKIP back or forward to move the cursor, select function button, long press to FF/FW, other operation please refer to the music function Button operation for details (showed as below)

 

Video Bookmarks

when press "ESC" to exit Video, will pop up whether to save book or not, press SKIP back or forward to select, press to confirm and back to play list, the files in list with bookmark will be market in the left side, user can reach last save position.

Delete files

In the video browsing interface, press "MODE" to pop up delete option, press SKIP back or forward to select whether to delete files or not, press to confirm and exit.

Calendar

Get into the calendar mode from the operation system interface, press "+" / "-" to select o enter the calendar display page, press "+" "-" SKIP back or forward to read calendar.

 

NOTE: the main menu shows the date in accordance with the set time.

GAME

games are disable.

Alarm clock

In the operation system interface, press "+" / "-" to choose press to confirm By moving the cursor, press SKIP back or forward to select alarm on/off time or time set, press to enter.

Alarm on/off press SKIP back or forward to select alarm clock on/off, press "ESC" to save and quit.

Set alarm time: press to enter time adjustment adjust value when display in yellow color, short press "ESC" to save and quit.

SETTING

Enter into the setting mode

In the operating system interface, press "+" / "-" to choose press to enter the interface as follows:

Language:

The MP4/DVR has several kinds of languages. press SKIP back or forward to move up and down, press "ESC" to save and quit

Date / Time

Setting the current date and time.

Press SKIP back or forward to switch up and down to adjust the date and time.

AV OUT

Connect the yellow, red, white, port of AV cable with the video, audio input port of tv, connect the other port of AV cable with the AV OUT port of MP4, the TV signal has PAL and NTSC output system, it can receive the best signal only when select the suitable system. Select TV in the set menu interface click SKIP back or forward for up and down to select the suitable system press "ESC" to back and confirm, the TV screen will display the play content, now the player screen is black and user can not make any operation, press "ESC" shortly to exit.

NOTICE: this player can only output the video/picture.

STORAGE

There are buil-in flash card and outer SD Card, press to select format or set work space and confirm.

Notice: the player will delete all files in the memory when format it. the files can't be resumed. we suggest to do this operation only when system is wrong.

SPEAKER

this operation is to control the on/off of the speaker, press SKIP back or forward to select, press "ESC" to save and exit.

BRIGHTNESS

This operation is to adjust the brightness of screen, press "+" "-" to select, press "ESC" to save and exit.

AUTO SCREEN OFF

This operation is to adjust the time of background light, press SKIP back or forward to select press, "ESC" to save and exit.

AUTO POWER OFF

In standby status, player will auto power off as set time.

DEFAULT SET

Resume the player to factory default state, (the internal data will not be charged)

DVR RECORD

In system operation interface, press "+" / "-" to select , to enter video input and DVR interface, press to start.

NOTE: Please connect all cables well before recording.

 

CAMERA

USER MANUAL

 

PRECAUTIONS

• Storage and Keeping

1. Do not expose this equipment to excessive heat or cold place.  The storage

temperature of the monitor is +68°F~+140°F (+20°~+60°C), the operating

temperature is +32°F~104°F (0°C~+40°C)

2. Avoid the machine from dropping or impacting.

3. Never extrude or fractioning this machine with sharp objects.

4. Cables are not allowed to touch hot or rotating parts, such as engine,

ventilators, etc.

5. Keep this equipment out of children’s reach.

• Operating Precautions

1. Connect this equipment only to other compatible units.

2. Make sure that all cables are connected properly, Improper connection may

result in system failures or damages to the system.

3. Cables are not to be pinched or stepped on.

4. Remove the cable connections when system is not in use.

5. The camera must not be located directly under the sun or any other bright

light source because this will not only result in a poor image, but also will

eventually damage the electronics of the camera

6. Additional lighting may be required if water quality is poor, or in low light

conditions

• Maintenance

1. Remove all cable connections before cleaning the camera.

2. Wipe off the moisture on the lens of camera regularly.

3. Keep the camera clean and dry when it is not in use.

4. Dry all equipment before storage

LIMITED WARRANTY

 

NavRoute Technologies (“NavRoute”) warrants this product against any defects in materials or workmanship for one year, parts and labor, from the date of purchase, with an original proof of purchase with retailer receipt. If service under this warranty is required, you must return the product to NavRoute for inspection.  You must first obtain a return material authorization (RMA) number from NavRoute Customer Service prior to returning any products. NavRoute Customer Service can be reached at support@theimportsworld.com .  If NavRoute determines that the product is defective, NavRoute will exchange or replace defective parts.

This warranty does not cover:

Products purchased at auctions, or auction sites. 

Damages from misuse, abuse, neglect, or accident, natural disasters, or Acts of God. 

Product which has been electronically or mechanically modified in any way or incorporated into other products. NavRoute is not responsible for any shipping, handling, or insurance charges.

 The remedies hereby provided shall be exclusive remedy of the buyer.  IN NO EVENT SHALL NAVROUTE BE LIABLE FOR ANY INDIRECT, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR SPECIAL DAMAGES, REGARDLESS OF WHETHER A CLAIM FOR SUCH DAMAGES IS BASED ON WARRANTY, CONTRACT, NEGLIGENCE OR OTHERWISE.

 

This warranty gives you specific legal rights and you may have other rights which vary from state to state.  Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

SPECIFICATIONS

 

Input voltage

12V DC

Image sensor:

Type: COLOR CCD  1/4 SHARP

Sensor Size:

3.6mm×2.7mm

Pixel Resolution:

NTSC:510(H)×492(V)

Lens Angular field of view: 

92degree

Effective focal length:

3.6mm

Resolution:

420 TV lines (H)

Video signal output:

1 V (p-p) composite video signal at 75ohm termination

Led lights:

21pcs

Power Consumption:

more than 48db

Packaging material:

High Impact ABS Plastic

Operating temperature:

-20ºF   +80ºF

Storage Temperature (ºC): 

-20~+60

Product Features

High waterproof and dust proof structure of underwater camera.

21 White LED lights for dark environments

System Connections

Diagram:

Troubleshooting

Symptoms below do not necessarily mean failure with the system.  Please check as following before request for repair.

Symptoms

Possible cause

No Picture

•Use of unauthorized power supply

 Battery low or empty

 Check whether the cables is connected

Dark picture

Check whether power cable is properly connected.

Dim Picture

Check whether the camera lens is dirty

No lights

 Check whether the Power cable is connected.

HOW TO CONNECT THE CAMERA TO THE DVR

Connect the power cables for the camera as show in Camera connection Diagram & connect the video out of the camera to the Female to Female RCA Adapter. After connect this adapter to the video input cable or the DVR unit. As show in the DVR Section in this Manual.

 

Conect the Camera to DVR

 

 

 

If you don't found the information you are looking for please contact us to:

support@theimportsworld.com

 

 

 

 

 

 

 

 

 

 

Copyright © 2010 Navroute Technologies All Rights Reserved.