Support
Neptune EZ
Operating Instructions
Neptune EZ
Underwater Camera System
Please read this manual thoroughly before operating the
unit, and keep it for future reference.
PRECAUTIONS
Storage and Keeping
1. Do not expose this equipment to excessive heat or cold place. The storage
temperature of the monitor is +68°F~+140°F (+20°~+60°C), the operating
temperature is +32°F~104°F (0°C~+40°C)
2. Avoid the machine from dropping or impacting.
3. Never extrude or fractioning this machine with sharp objects.
4. Cables are not allowed to touch hot or rotating parts, such as engine,
ventilators, etc.
5. Keep this equipment out of children’s reach.
Operating Precautions
1. Connect this equipment only to other compatible units.
2. Make sure that all cables are connected properly, Improper connection may
result in system failures or damages to the system.
3. Cables are not to be pinched or stepped on.
4. Remove the cable connections when system is not in use.
5. The camera must not be located directly under the sun or any other bright
light source because this will not only result in a poor image, but also will
eventually damage the electronics of the camera
6. Additional lighting may be required if water quality is poor, or in low light
conditions
Maintenance
1. Remove all cable connections before cleaning the camera.
2. Wipe off the moisture on the lens of camera regularly.
3. Keep the camera clean and dry when it is not in use.
4. Dry all equipment before storage
LIMITED WARRANTY
NavRoute Technologies (“NavRoute”) warrants this product against any defects in materials or workmanship for one year, parts and labor, from the date of purchase, with an original proof of purchase with retailer receipt. If service under this warranty is required, you must return the product to NavRoute for inspection. You must first obtain a return material authorization (RMA) number from NavRoute Customer Service prior to returning any products. NavRoute Customer Service can be reached at support@theimportsworld.com . If NavRoute determines that the product is defective, NavRoute will exchange or replace defective parts.
This warranty does not cover:
Products purchased at auctions, or auction sites.
Damages from misuse, abuse, neglect, or accident, natural disasters, or Acts of God.
Product which has been electronically or mechanically modified in any way or incorporated into other products. NavRoute is not responsible for any shipping, handling, or insurance charges.
The remedies hereby provided shall be exclusive remedy of the buyer. IN NO EVENT SHALL NAVROUTE BE LIABLE FOR ANY INDIRECT, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR SPECIAL DAMAGES, REGARDLESS OF WHETHER A CLAIM FOR SUCH DAMAGES IS BASED ON WARRANTY, CONTRACT, NEGLIGENCE OR OTHERWISE.
This warranty gives you specific legal rights and you may have other rights which vary from state to state. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
SPECIFICATIONS
Input voltage |
12V DC |
Image sensor: |
Type: COLOR CCD 1/4 SHARP |
Sensor Size: |
3.6mm×2.7mm |
Pixel Resolution: |
NTSC:510(H)×492(V) |
Lens Angular field of view: |
92degree |
Effective focal length: |
3.6mm |
Resolution: |
420 TV lines (H) |
Video signal output: |
1 V (p-p) composite video signal at 75ohm termination |
Led lights: |
21pcs |
Power Consumption: |
more than 48db |
Packaging material: |
High Impact ABS Plastic |
Operating temperature: |
-20ºF +80ºF |
Storage Temperature (ºC): |
-20~+60 |
Product Features
High waterproof and dust proof structure of underwater camera.
21 White LED lights for dark environments
System Connections
Diagram:
Troubleshooting
Symptoms below do not necessarily mean failure with the system. Please check as following before request for repair.
Symptoms |
Possible cause |
No Picture |
Use of unauthorized power supply |
Battery low or empty |
|
Check whether the cables is connected |
|
Dark picture |
Check whether power cable is properly connected. |
Dim Picture |
Check whether the camera lens is dirty |
No lights |
Check whether the Power cable is connected. |
If you don't found the information you are looking for please contact us to: